COILS

Supplier of Coils in India - Deltron Alloys

Deltron Alloys is India’s leading Supplier of Coils. Our inventory includes a wide range of Industrial Coils, which are highly sought after in the Metal Market. Hot & Cold Rolled Coils are available in various sizes, shapes, and dimensions, and can be customised to meet the specific requirements of our customers. We ensure the delivery of Coils in the right quantity and with the appropriate quality to cater to the diverse needs of various industrial sectors.

Supplier of Sheets / Plates & Coils, Hot & Cold Rolled Coils, and Industrial Sheets & Plates in India

Deltron Alloys is dedicated to meeting the demands of various industries. Our Perforated Sheets are designed with added advantages and functionality to fulfil industrial requirements. To maintain consistency and ensure compliance with all specifications, we conduct both destructive and non-destructive inspections. Additionally, we are recognized as a major supplier of Round Bars.

Applications & Utilisation of Sheets / Plates and Coils:

Roofing Industries
Switchgear Industries
Heat Exchangers
Instrumentation sector
Metallurgical Industries
Oil and Gas Industries
Pharmaceuticals
Power Plants
Water Treatment Plants
Water Desalination Plant sector

Additional Information about Sheets / Plates & Coils:

Payment Modes for Coils: LC (Letter of Credit), TT (Telegraphic Transfer or Wire Transfer), Cheque, and other methods
Packaging of Coils: Our products are carefully packaged to ensure they reach our clients in optimal condition. Additional packaging charges may apply.
Port of Dispatch for Coils: Mumbai or Nhava Sheva ports in the Maharashtra state of India.
Tax for Coils: 18% GST.

Specification of Sheets / Plates / Coils

Specifications	ASTM A240 / ASME SA240
Thickness	4mm-100mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Brass	C 27000, C 27200, C 28000
Aluminium	6063, 6061T6/T651, 6082 T6/T651, 5052, 5083, 5086, 7075, 1100, 2014, 2024
SMO 254	SMO 254

Specification of Stainless Steel Sheets / Plates / Coils

Standard	ASTM，AISI，JIS，GB， DIN，EN
Grade	304, 304L, 304H, 316, 316L, 316TI, 317, 317L, 347, 309, 310, 310S, 409, 410, 430, DUPLEX, SUPER DUPLEX.
Thickness	0.3-200mm
Length	1000-6000mm or as customer’s requirement
Width	100-3000mm or as customer’s requirement
Technique	Hot-Rolled (HR), Cold-Rolled (CR)

Equivalent Grades for Sheets, Plates & Coils :

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 304	1.4301	S30400	SUS 304	304S31	08Х1Н10	Z7CN18‐09	X5CrNi18-10
SS 304L	1.4306 / 1.4307	S30403	SUS 304L	3304S11	03Х18Н11	Z3CN18-10	X2CrNi18-9 / X2CrNi19-11
SS 310	1.4841	S31000	SUS 310	310S24	20Ch25N20S2	–	X15CrNi25-20
SS 316	1.4401 / 1.4436	S31600	SUS 316	316S31 / 316S33	–	Z7CND17‐11‐02	X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316Ti	1.4571	S31635	SUS 316Ti	320S31	08Ch17N13 M2T	Z6CNDT17‐123	X6CrNiMoTi17-12-2
SS 317L	1.4438	S31703	SUS 317L	–	–	–	X2CrNiMo18-15-4
SS 321	1.4541	S32000	SUS 321	–	–	–	X6CrNiTi18-10
SS 347	1.455	S34700	SUS 347	–	–	–	08Ch18N12B
SS 410	1.4006	S41000	SUS 410	–	X10Cr13	–	–
STANDARD	WERKSTOFF NR.	UNS	JIS	BS	KS	AFNOR	EN
SS 904L	1.4539	N08904	SUS 904L	904S13	STS 317J5L	Z2 NCDU 25-20	X1NiCrMoCu25-20-5
STANDARD	WERKSTOFF NR.	UNS	SAF	–	–	–	–
Duplex Steel S31803	1.4462	S31803	–	–	–	–	–
Duplex Steel S32205	1.4462	S32205	2205	–	–	–	–
Super Duplex Steel S32750	1.441	S32750	2507	–	–	–	–
Super Duplex Steel S32760	1.441	S32760	–	–	–	–	–

Sheets, Plates & Coils Chemical Composition :

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	–
SS 304	0.08 max	2 max	0.75 max	0.045 max	0.030 max	18 – 20	–	8 – 11	–	–
SS 304L	0.035 max	2 max	1.0 max	0.045 max	0.030 max	18 – 20	–	8 – 13	–	–
SS 316Ti	0.08 max	2.0 max	0.75 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	10.00 – 14.00	68.395 min	–
Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe	–
SS 310	0.015 max	2.0 max	0.15 max	0.020 max	0.015 max	24.00 – 26.00	0.10 max	19.00 – 21.00	54.7 min	–
SS 316	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	11.00 – 14.00	67.845 min	–
SS 316L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	16.00 – 18.00	2.00 – 3.00	11.00 – 14.00	68.89 min	–
SS 317L	0.035 max	2.0 max	1.0 max	0.045 max	0.030 max	18.00 – 20.00	3.00 – 4.00	11.00 – 15.00	57.89 min	–
Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Cu	–
SS 904L	0.020 max	2.00 max	1.00 max	0.040 max	0.030 max	19.00 – 23.00	4.00 – 5.00 max	23.00 – 28.00	1.00 – 2.00	–
Grade	C	Mn	Si	P	S	Cr	N	Ni	Ti	–
SS 321	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 19.00	0.10 max	9.00 – 12.00	5(C+N) – 0.70 max	–
Grade	C	Mn	Si	P	S	Cr	Cb	Ni	Fe	–
SS 347	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 20.00	10xC – 1.10	9.00 – 13.00	62.74 min	–
Grade	C	Mn	Si	P	S	Cr	Ni	–	–	–
SS 410	0.015 max	1.0 max	1.0 max	0.04 max	0.030 max	11.5 – 13.5	0.75 max	–	–	–
Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Fe
Duplex Steel S31803	0.030 max	2.00 max	1.00 max	0.030 max	0.020 max	22.0 – 23.0	3.0 – 3.5	4.50 – 6.50	0.14 – 0.20	63.72 min
Duplex Steel S32205	0.030 max	2.00 max	1.00 max	0.030 max	0.020 max	21.0 – 23.0	2.50 – 3.50	4.50 – 6.50	0.8 – 0.20	63.54 min
Super Duplex Steel S32750	0.030 max	2.00 max	1.00 max	0.030 max	0.020 max	21.0 – 23.0	2.50 – 3.50	4.50 – 6.50	0.8 – 0.20	63.54 min
Super Duplex Steel S32760	0.05 max	1.00 max	1.00 max	0.030 max	0.010 max	24.00 – 26.00	3.00 – 4.00	6.00 – 8.00	0.20 – 0.30	57.61 min

Mechanical Properties of Sheets, Plates & Coils :

STANDARD	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 304	8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
SS 304L	8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
SS 310	7.9 g/cm3	1402 °C (2555 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	40 %
SS 316	8.0 g/cm3	1399 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
SS 316L	8.0 g/cm3	1399 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
SS 316Ti	8.0 g/cm3	1399 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
SS 317L	7.9 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
STANDARD	Hardness Rockwell B (HR B) max	Hardness Brinell (HB) max	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 321	95	217	515	205	40
STANDARD	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 347	8.0 g/cm3	1457 °C (2650 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %
STANDARD	Density	Hardness	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 410	7.8 g/cm3	82 – 96	65 (450) – 74 (510)	30 (205) – 42 (290)	20 – 34
STANDARD	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
SS 904L	7.95 g/cm3	1350 °C (2460 °F)	Psi – 71000 , MPa – 490	Psi – 32000 , MPa – 220	35 %
Duplex Steel S31803	7.8 g/cm 3	1350 °C (2460 °F)	Psi – 80000 , MPa – 550	Psi – 116000 , MPa – 800	15 %
Duplex Steel S32205	7.8 g/cm 3	1350 °C (2460 °F)	Psi – 80000 , MPa – 550	Psi – 116000 , MPa – 800	15 %
Super Duplex Steel S32750	7.8 g/cm 3	1350 °C (2460 °F)	ksi – 116	ksi – 80	15 %
Super Duplex Steel S32760	7.8 g/cm 3	1350 °C (2460 °F)	ksi – 116	ksi – 80	15 %

Specification of Alloy Steel Sheets / Plates / Coils

Standard	ASTM A387 / ASME SA387
Grade	ASTM, A-387, GR.11, 12, 22, 5, 9, 9I, CL+1/CL-2
Thickness	5-150mm
Length	3000-18000mm or as customer’s requirement
Width	1000-4500mm or as customer’s requirement
Technique	Hot-Rolled (HR), Cold-Rolled (CR)

Equivalent Grades for Sheets, Plates & Coils :

Grade	BS	EN	ASTM/ASME	DIN
ASTM A387 Grade 5	–	X12CrMo5	A387 / SA 387	–
ASTM A387 Grade 9	–	–	SA387-9-2	–
ASTM A387 Grade 11	621 B	–	SA387-11-2	–
ASTM A387 Grade 12	620 B	13 CRMO 45	SA387-12-2	13 CRMO 44
ASTM A387 Grade 22	622-515B	10 CRMO910	SA387-22-2	10 CRMO910

Sheets, Plates & Coils Chemical Composition :

Grade	C	Mn	P	S	SI	Cr	Mo
ASTM A387 Grade 5	0.15 max	0.3 – 0.6	0.035	0.03	0.5 max	4.00 – 6.00	0.45 – 0.65
ASTM A387 Grade 9	0.15 max	0.30 – 0.6	0.03	0.03	1.0 max	8.0 – 10.0	0.9 – 1.1
ASTM A387 Grade 11	0.05 – 0.17	0.4 – 0.65	0.035	0.035	0.5 – 0.80	1.0 – 1.5	0.45 – 0.65
ASTM A387 Grade 12	0.05 – 0.17	0.4 – 0.65	0.035	0.035	0.15 – 0.4	0.8 – 1.15	0.45 – 0.6
ASTM A387 Grade 22	0.05 – 0.15	0.3 – 0.6	0.035	0.035	0.5 max	2.0 – 2.5	0.9 – 1.1

Mechanical Properties of Sheets, Plates & Coils :

Grades	Tensile	Yield	% Elongation	Bend
ASTM A387 Grade 5	515 – 690	310	18	—
ASTM A387 Grade 11	515 – 690	310	22	18
ASTM A387 Grade 12	450 – 585	275	22	19
ASTM A387 Grade 22	515 – 690	310	18	—

Specification of Carbon Sheets / Plates / Coils

Standard	ASTM / ASME A 516 / A283
Grade	ASTM A-516 GR.60, 65 & 70, IS 2062 GR. A/B, A36, S275, S355, S355J2+N, JO+N, Sailma 350,410, 450, A572, Gr.50, Is 2062, E250, E350, E410, Nace Hic Steel Plates
Sizes	1 mm to 200 mm thk in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm / coil.
Thickness	3/16″ to 24″
Finish	Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Plain Sheet, Coils, Foils, Shim Sheet, Rolls, Chequered Plate, Perforated Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Equivalent Grades for Sheets, Plates & Coils :

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN	–	–	–	–
ASTM A-516 GR.60	1.057	G10180	SS400	4360	3SP/PS	AC-282	S275	–	–	–	–
ASTM A-516 GR.65	1.0585	K11510	SS490	50D	5SP/PS	AC-312	S355	–	–	–	–
ASTM A-516 GR.70	1.0615	K12110	SM490	50D	5SP/PS	AC-342	S355J2+N	–	–	–	–
IS 2062 GR. A	–	–	–	–	–	–	–	–	–	–	–
STANDARD	DIN 17100	BS 4360	EN 10025 (90)	EN 10025 (93)	NFA 35-501			–	–	–	–
IS 2062 GR. B	St 44-3U	43 C	Fe 430C	S275J0	E28-3			–	–	–	–
STANDARD	USA	JIS	BS	GB	EN	ISO	IS	–	–	–	–
A36	A36	SM 400 A	40EE	Q235D	Fe360D2, S235J2G4	Fe 360B	IS 226	–	–	–	–
STANDARD	US	–	–	–	–	–	–	–	–	–	–
S275	A570Gr40	–	–	–	–	–	–	–	–	–	–
S355	A572Gr50	–	–	–	–	–	–	–	–	–	–
STANDARD	EN 10025-2		DIN		JIS		ASTM	–	–	–	–
S355J2+N	S355J2+N	1.0577+N	17100	St52-3N	G3106	SM490YB	A572-50	–	–	–	–
STANDARD	WERKSTOFF NR.	UNI	JIS	BS	GB	AFNOR	EN	NBN	UNE	ISO	IS
S355JO+N	St52-3U	Fe510C	SS490B	50C	16Mn	E36-3	Fe510C	AE355C	AE355C	E355C	Fe570HT
STANDARD	IS 2062	IS 8500	EN 10025	EN 10149-2	SEW 092:1990	DIN	–	–	–	–	–
SAILMA 350	GRADE E350	FE 490 B	ST 52.3	S355MC	–	1.0976	–	–	–	–	–
SAILMA 410	GRADE E410	FE 540 B	ST 54	S420MC	QstE420TM		–	–	–	–	–
SAILMA 450	GRADE E410	FE 540 B	ST 54	S420MC	QstE420TM	1.098	–	–	–	–	–
STANDARD	EN	DIN	UNI	NF	JIS	–	–	–	–	–	–
ASTM A572 Gr.50	S355J2+N	ST52-3N	FE510D	E36-3	SM490C	–	–	–	–	–	–
STANDARD	DIN 17100	BS 4360	EN 10025 (90)	EN 10025 (93)	NFA 35-501	–	–	–	–	–	–
IS 2062 E 250	St 44-3U	43 C	S275J0	Fe 430C	E28-3	–	–	–	–	–	–
STANDARD	DIN 17100	ASTM	JIS	EN	–	–	–	–	–	–	–
IS 2062 E 350	St52-3N	A572-50	G3106SM490YB	10025-2:2004 S355J2+N	–	–	–	–	–	–	–
STANDARD	DIN17100	UNI	JIS	BS	EN10025(93)	EN10025(90)	–	–	–	–	–
IS 2062 E 410	St 52-3N	Fe 510	SS490C	50D	S355J2G3	Fe 510D2	–	–	–	–	–
STANDARD	ASTM/ASME	DIN 17155	BS	EN			–	–	–	–	–
SA 516 GR.60N NACE + HIC	A/SA516 – Gr 60	HII	BS1501-161-430A	EN10028 P265GH	–	–	–	–	–	–	–
SA 516 GR.65N NACE + HIC	A/SA516 – Gr 65	17 MN 4	BS1501-224-460A/B	EN10028 P295GH	–	–	–	–	–	–	–
SA 516 GR.70N NACE + HIC	A/SA516 – Gr 70	–	BS1501-224-490A/B	EN10028 P355GH	–	–	–	–	–	–	–

Sheets, Plates & Coils Chemical Composition :

Standard

–

ASTM A-516 GR.60

0.20 – 0.26

0.15 – 0.30

0.60 – 1.65

0.035 max

balance

–

ASTM A-516 GR.65

0.20 – 0.26

0.15 – 0.30

0.60 – 1.65

0.035 max

balance

–

ASTM A-516 GR.70

0.20 – 0.26

0.15 – 0.30

0.60 – 1.65

0.035 max

balance

–

IS 2062 GR. A

0.23

0.4

1.5

0.05

–

IS 2062 GR. B

0.22

0.4

1.5

0.045

–

ASTM A36

0.25 max

0.4 max

0.8-1.2

0.035 max

–

S275

0.22 max

0.05 max

1.60 max

0.05 max

–

S355

0.20 max

0.55 max

1.60 max

0.025 max

–

Standard

CEV

–

S355J2+N

0.22 max

0.55 max

1.60 max

0.035 max

0.55 max

0.47 max

–

Standard

CEV

–

S355JO+N

0.22 max

0.55 max

1.6 max

0.035 max

0.55 max

0.47 max

0.012 max

–

Standard

–

SAILMA 350

0.2

0.5

1.5

0.04

–

Standard

Nb + V + Ti

–

SAILMA 410

0.25

0.4

1.5

0.055

0.01

0.2

–

Standard

–

SAILMA 450

0.2

0.5

1.5

0.04

–

Standard

–

ASTM A572 Gr.50

0.23

0.4

1.35

0.04

0.05

0.06

0.015

–

Standard

–

IS 2062 E 250

0.23

0.4

1.5

0.045

0.42

–

IS 2062 E 350

0.2

0.45

1.5

0.045

–

IS 2062 E 410

0.2

0.45

1.6

0.045

0.5

–

Standard

SA 516 GR.60N NACE + HIC

0.2

0.4

0.95/1.50

0.025

0.02

0.3

0.08

0.01

0.03

0.02

SA 516 GR.65N NACE + HIC

0.08/0.20

0.4

0.9/1.5

0.03

0.02

0.3

0.08

0.01

0.03

0.02

SA 516 GR.70N NACE + HIC

0.18

0.4

0.95/1.50

0.015

0.008

0.02 min

0.3

0.08

0.01

0.03

0.02

Mechanical Properties of Sheets, Plates & Coils :

Standard

Tensile strength (ksi)

Yield strength (ksi)

Elongation min, % 200 mm (8 in)

Elongation min, % 50 mm (2 in)

–

ASTM A-516 GR.60

485-620 (70-90)

260 (38)

–

ASTM A-516 GR.65

65-85

–

ASTM A-516 GR.70

485-620 (70-90)

260 (38)

–

Standard

Yield strength (Mpa)(Min)

Tensile strength (Mpa)(Min)

Elongation (%)

–

＜20mm

20mm-40mm

＞40mm

–

IS 2062 GR A

250

240

230

410

–

Standard

Yield strength (Mpa)(Min)

Tensile strength (Mpa)(Min)

Elongation (%)

IMPACT (Min)

–

＜20mm

20mm-40mm

＞40mm

–

IS 2062 GR B

250

240

230

410

27J at 0 ° C

–

Standard

Tensile strength MPa

Yield strength MPa

Elongation in 8 in. [200 mm], min, %

Elongation in 2 in. [50 mm], min, %

–

A36

400 – 550

250

–

S275

370 – 530

275

–

S355

470 – 630

355

–

Standard

Thickness (mm)

Yield Strength Reh min (N / mm²)

Tensile Strength Rm min (N / mm²)

Elongation A5 min (%)

Impact Values Charpy-V-Notch Longitudinal Average from 3 Speimens Thk. >10<150mm.

–

S355J2+N

3<thk<100

315-355

490-630

max 22

27 Joules at -20 C

–

Standard

Tensile strength (MPa)

Yield strength (MPa)

Elongation Lo = 5,65 √ (%)

Elongation Lo = 80 mm (%)

to 3

3 – 100

100 – 150

150 – 250

to 16

16 – 40

40 – 63

63- 80

80 – 100

100 – 150

150 – 200

200 – 250

Mar – 40

40 – 63

63 – 100

100 – 150

150 – 250

to 1

1 – 1.5

1.5 – 2

2 – 2.5

2.5 – 3

S355JO+N

510 – 680

470 – 630

450 – 600

355

345

335

325

315

295

285

275

Standard

Yield strength (MPa) (Min)

Tensile strength (MPa) (Min)

Elongation (%)

Impact (Min)

–

SAILMA 350

355

490 – 610

40J at 0°C

–

SAILMA 410

410

540 – 660

35J at 0°C

–

SAILMA 450

410

540-660

35J at 0°C

–

Standard

Thickness

Yield

Tensile

Elongation

–

A572 Grade 50

8mm-200mm

MPa – 345 min

MPa – 450 min

18 – 21%

–

IS 2062 E 250

5mm-150mm

MPa – 250 min

MPa – 410 min

–

Standard

Yield strength (Mpa)(Min)

Tensile strength (Mpa)(Min)

Elongation (%)

–

＜20mm

20mm-40mm

＞40mm

–

IS 2062 E350

350

330

320

490

–

IS 2062 E410

410

390

380

540

–

Standard

Tensile strength MPa

Yield strength MPa

Elongation min, % 200 mm (8 in)

Elongation min, % 50 mm (2 in)

–

SA 516 GR.60N NACE + HIC

415-550

250

–

SA 516 GR.65N NACE + HIC

450-585

240

–

SA 516 GR.70N NACE + HIC

485-620

260

–

Specification of Abrasion Resistant Sheets / Plates / Coils

Standard	ASTM, ASME and API
Grade	200 BHN, 400 BHN, 450 BHN & 500 BHN
Width	1,500mm to 2,500mm
Thickness	4.0mm – 100mm
Length	6,000mm to 12,000mm
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)

Equivalent Grades for Sheets, Plates & Coils :

Grade	STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
BHN 200	ASTM A108	1010	G10100	SS14	EN 10016-3	08ps	E295	1.0301
BHN 200	ASTM A36	1020	G10200	SS400	EN10025-S235JR	09G2S	E225	1.0038
BHN 400	ASTM A572	Gr. 50	G50	SM570	EN10025-S460N	14G2AF	E460	1.821
BHN 400	ASTM A514	Gr. F	G10220	SM490B	EN10025-S355J2G3	16Mo3	E355	1.057
BHN 450	ASTM A572	Gr. 60	G60	SM590	EN10025-S550N	16MnCr5	E550	1.8143
BHN 450	ASTM A514	Gr. Q	G10230	SM520B	EN10025-S420J2G3	18Mo3	E420	1.058
BHN 500	ASTM A572	Gr. 65	G65	SM620	EN10025-S690N	20MnCr5	E690	1.8159
BHN 500	ASTM A514	Gr. T	G10240	SM550B	EN10025-S460J2G3	20Mo3	E460	1.06

Sheets, Plates & Coils Chemical Composition :

Grade	C	Mn	S	P	Si	–	–	–	–	–
BHN 200	0.23 max	1.6 min	0.05 max	0.05 max	0.5 max	–	–	–	–	–
Grade	Plate (thickness mm)	C	Si	Mn	P	S	Cr	Ni	Mo	B
BHN 400	3 – 6	0.15 max	0.70 max	1.60 max	0.025 max	0.01 max	0.50 max	0.25 max	0.25 max	0.004 max
	3 – (8)	0.15 max	0.70 max	1.60 max	0.025 max	0.01 max	0.30 max	0.25 max	0.25 max	0.004 max
	8 – 20	0.15 max	0.70 max	1.60 max	0.025 max	0.01 max	0.50 max	0.25 max	0.25 max	0.004 max
	(20) – 32	0.18 max	0.70 max	1.60 max	0.025 max	0.01 max	1.00 max	0.25 max	0.25 max	0.004 max
	(32) – 45	0.22 max	0.70 max	1.60 max	0.025 max	0.01 max	1.40 max	0.50 max	0.60 max	0.004 max
	(45) – 51	0.22 max	0.70 max	1.60 max	0.025 max	0.01 max	1.40 max	0.50 max	0.60 max	0.004 max
	(51) – 80	0.27 max	0.70 max	1.60 max	0.025 max	0.01 max	1.40 max	1.00 max	0.60 max	0.004 max
	(80) – 130	0.32 max	0.70 max	1.60 max	0.025 max	0.01 max	1.40 max	1.50 max	0.60 max	0.004 max
Grade	C	Mn	S	P	Si	Cr	Ni	Mo	B	–
BHN 450	0.26 max	1.6 max	0.01 max	0.025 max	0.7 max	1040 max	1050 max	0.6 max	0.005 max	–
Grade	Plate (thickness mm)	C	Si	Mn	P	S	Cr	Ni	Mo	B
BHN 500	4 – 13	0.27 max	0.7 max	1.6 max	0.025 max	0.01 max	1.0 max	0.25 max	0.25 max	0.004 max
	(13) – 32	0.29 max	0.7 max	1.6 max	0.025 max	0.01 max	1.0 max	0.50 max	0.30 max	0.004 max
	(32) – 40	0.29 max	0.7 max	1.6 max	0.025 max	0.01 max	1.0 max	1.00 max	0.60 max	0.004 max
	(40) – 80	0.30 max	0.7 max	1.6 max	0.025 max	0.01 max	1.50 max	1.50 max	0.60 max	0.004 max

Mechanical Properties of Sheets, Plates & Coils :

Grade	Yield (Min Mpa)		Tensile (Mpa)	Elongation %	Reduction of area %
BHN 200	250 – 350		350 – 450	20 – 30	30 – 40
Grade	Yield (Min Mpa)		Tensile (Mpa)	Elongation %	–
BHN 400	1000		1250	10	–
BHN 450	1200		1400	10	–
Grade	HBW Thickness/Mpa		Elongation %	–	–
Grade	4-32MM	470-530	Elongation %	–	–
BHN 500	(32) – 80	450 – 540	10	–	–

Specification of Hadfield Manganese Steel Sheets / Plates / Coils

Item	Hadfield High Manganese Steel Sheets & Plates
Grade	12-14% MN
Thickness	35 – 150mm
Length	3000 – 18000mm
Width	1000 – 4500mm
Technique	Hot-Rolled (HR)
Impact tested	-52° C

Equivalent Grades for Sheets, Plates & Coils :

Grade	EURONORM	DIN	ASTM	AFNOR
12-14% MN	1.3401 – X120Mn13	W1.3401	A128 Gr B2	X120Mn13

Sheets, Plates & Coils Chemical Composition :

Grade	C	Mn	Si	S	P
12-14% MN	1.20%	12.00-14.00%	0.15%	0.02%	0.02%

Mechanical Properties of Sheets, Plates & Coils :

Grade	Tensile Strength N/mm²	Yield Strength N/mm²	Elongation %	Hardness Brinell
12-14% MN	880	320	40	200

Specification of Corten Sheets / Plates / Coils

Standard	ASTM A588 / ASME SA588
Grade	A & B, A588 GR A & B S355, J2W
Dimension Standard	JIS, AISI, ASTM, GB, DIN, EN, etc
Width	500mm, 1250mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness	0.3 mm to 120 mm
Length	2500mm, 1000mm, 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), rustic look
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring (Flange)

Equivalent Grades for Sheets, Plates & Coils :

Grade	EN 10025-5:2004
Corten A	S355J0WP
Corten B	S355J0W and S355J2W
Grade	EN 10025-5
ASTM A588 GR.A	S355J2WP
ASTM A588 GR.B	S355J2W+N
Grade	ASTM
S355J2W	A588 Grade A

Sheets, Plates & Coils Chemical Composition :

Grade	C	Si	Mn	P	S	Cr	Ni	Cu	Nb+V+Ti
Corten A	0.12	0.25-0.75	0.20-0.50	0.07-0.15	0.03	0.50-1.25	0.65	0.25-0.55	–
Grade	C	Si	Mn	P	S	Cr	Ni	Cu	Al	V
Corten B	0.19 max	0.30 – 0.65	0.80 – 1.25	0.035 max	0.030 max	0.40 – 0.65	0.40 max	0.25 – 0.40	0.020 – 0.06	0.02 – 0.10
Grade	C	Si	Mn	P	S	Cr	Ni	Cu	N
ASTM A588 GR.A	0.19 Max	0.30-0.65	0.80-1.25	0.05	0.04	0.40-0.65	0.05	0.25-0.40	0.01
Grade	C	Si	Mn	P	S	Cr	Ni	Cu	N	V
ASTM A588 GR.B	0.20 Max	0.15-0.50	0.75-1.35	0.04	0.05	0.40-0.70	0.05	0.20-0.40	0.01	0.01-0.10
Grade	C	Si	Mn	P	S	Cr	CEV	Cu
S355J2W	0.16 max.	0.50 max.	0.5 – 1.5	0.03 max.	0.03 max.	0.4 – 0.8	0.52 max.	0.25 – 0.55

Mechanical Properties of Sheets, Plates & Coils :

Grade	*Yield point ReH Mpa )**						Tensile strength Rm MPa			Elongation %	Bend
CORTEN A	355						470-630 Mpa			20	24t
Grade	Yield strength ReL N/mm² Minimum						Tensile strength Rm N/mm² Minimum			Elongation A50% Minimum	–
CORTEN B	345						485			19	–
	Yield Strength ReH[N/mm2]transv.min						TensileStrength Rm[N/mm2]transv			Thickness	–
A588 Gr. A	340 KPa 320 KPa 290 KPa						480 KPa 460 KPa 430 KPa			0mm-100mm 102mm-127mm 127mm-203mm	–
											–
											–
A588 Gr. B	340 KPa 320 KPa 290 KPa						480 KPa 460 KPa 430 KPa			0mm-100mm 102mm-127mm 127mm-203mm	–
											–
											–
Grade	Min. Yield Strength Reh MPa						Tensile Strength Rm MPa
	Nominal Thickness (mm)						Nominal Thickness (mm)
	≤16	>16 ≤40	>40 ≤63	>63 ≤80	>80 ≤100	>100 ≤150	>3	>3 ≤100	>100 ≤150
S355J2W	355	345	335	325	315	295	510/680	470/630	450/600

Specification of High Yield Steel Sheets / Plates / Coils

Specification	High Tensile Steel Plates
Grade	S690QL & S700MC, S550MC, HITEN 780LE
Sizes	1 mm to 200 mm thk in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm / coil.
Width	1000 – 3000 mm
Lengths	up to 20m
Thickness	3 to 250 mm
Technique	Hot-Rolled (HR) and Cold-Rolled (CR)

Equivalent Grades for Sheets, Plates & Coils :

Grade	Standard	JIS	DIN, WNr	ASTM	ISO 4952	AFNOR
S690QL	EN 10025-2:2004	JFE HITEN 780LE	TStE690V DILLIMAX 690 NAXTRA 70	A709-100	E690	E690T, E690TFP, S690T
Grade	BS1449	ASTM	UNI8890	NFA 36-231	SEW092	–
S700MC	75F70	A514	–	E690D	QStE 690 TM	–
Grade	BS1449	ASTM	UNI8890	NFA 36-231	SEW092	–
S550MC	60F45/60F55	080XLK	FeE560TM	E560D	QStE 550TM	–
Grade	Standard	JIS	WES	ASTM	–	–
HITEN 780LE	JFE-HITEN 780LE	G3128 SHY685 SHY685N SHY685NS	HW 685	A514 A709 Gr.100	–	–

Sheets, Plates & Coils Chemical Composition :

Grade

Мn

Сr

Сu

Мо

S690QL

0.20

0.80

1.70

0.020 – 0.025

0.010 – 0.015

0.015

0.005

1.50

0.50

0.70

0.06

2.00

0.12

Grade

–

S700MC

0.12

0.6

2.1

0.025

0.015

0.09

0.2

0.22

0.5

0.005

–

Grade

–

S550MC

0.12

0.5

1.8

0.025

0.015

0.09

0.2

0.15

–

Grade

Ceq*

–

HITEN 780LE

≤0.20

1.60

≤0.005

≤0.40 1

–

Mechanical Properties of Sheets, Plates & Coils :

Grade	Thickness, mm	Yield strength, min MPa	Tensile strength, MPa	Elongation, min %	–	–
S690QL	≥8 t ≤50	690	770 – 940	14	–	–
Grade	ReH-Minimum yield strength(Mpa)	Rm-Tensile strength(Mpa)	Nominal thickness(mm)	A-Minimum elongation Lo=5,65√So(%)	Nominal thickness(mm)	A-Minimum elongation Lo=Lo=80mm(%)
S700MC	700	750 – 950	From3	12	to3	10
Grade	ReH-Minimum yield strength(Mpa)	Rm-Tensile strength(Mpa)	Nominal thickness(mm)	A-Minimum elongation Lo=5,65√So(%)	Nominal thickness(mm)	A-Minimum elongation Lo=Lo=80mm(%)
S550MC	550	600 – 760	From3	14	to3	12
Grade	Thickness (mm)	Yield Strength Min. (N/mm 2)	Tensile Strength (N/mm 2)	–	–	–
HITEN 780LE	6 – 32	685	780 – 930	–	–	–

Specification of Nickel Alloy Sheets / Plates / Coils

Standard	ASTM / ASME SB 168
Grade	INCOLLOY 800/800H, INCOLLOY 825, HASTELLOY C-276, ALLOY 20, ETC.
Size	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 12 mm Thk
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Equivalent Grades for Sheets, Plates & Coils :

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	EN	AFNOR	OR
Incoloy 800	1.4876	N08800	NCF 800	NA 15	ЭИ670	X10NiCrAlTi32-20	Z8NC32-21	XH32T
Incoloy 800H	1.4958	N08810	NCF 800H	NA 15(H)	ЭИ670	X10NiCrAlTi32-20	Z8NC32-21	XH32T
Incoloy 800HT	1.4959	N08811	NCF 800HT	NA 15(HT)	ЭИ670	X8NiCrAlTi32-21	–	XH32T
Alloy 825	2.4858	N08825	NCF 825	NA 21	ЭП703	NiCr22Mo9Nb	NC22DNB4M	ЭИ602
Hastelloy C276	2.4819	N10276	NW 0276	–	ХН65МВУ	NiMo16Cr15W	–	ЭП760
Alloy 20	2.466	N08020	–	–	–	NiCr20CuMo	Z2NCUD31-20AZ	–

Sheets, Plates & Coils Chemical Composition :

Grade	C	Si	Mn	Cr	Ni	Fe	Cu	Ti	Al	S
Incoloy 800	0.1 max	1.0 max	1.5 max	19.0 – 23.0	30.0 – 35.0	39.5 min	0.75 max	0.15 – 0.60	0.15 – 0.60	0.015 max
Incoloy 800H	0.05 – 0.10	1.0 max	1.5 max	19.0 – 23.0	30.0 – 35.0	39.5 min	0.75 max	0.15 – 0.61	0.15 – 0.61	0.015 max
Incoloy 800HT	0.06 – 0.10	1.0 max	1.5 max	19.0 – 23.0	30.0 – 35.0	39.5 min	0.75 max	0.25 – 0.60	0.85 – 1.20	0.015 max
Incoloy 825	0.10 max	0.50 max	0.50 max	20.0 – 23.0	58.0 min	5.0 max	–	0.40 max	0.40 max	0.015 max
Grade	C	Si	Mn	Cr	Ni	Fe	Co	Mo	P	S
Hastelloy C276	0.010 max	0.08 max	1.00 max	14.50 – 16.50	50.99 min	4.00 – 7.00	2.50 max	15.00 – 17.00	0.04 max	0.03 max
Grade	C	Si	Mn	Cr	Ni	Fe	Cu	Mo	P	S
Alloy 20	0.07 max	1.00 max	2.00 max	19.00 – 21.00	32.00 – 38.00	29.85 min	3.00 – 4.00	2.00 – 3.00	0.045 max	0.035 max

Mechanical Properties of Sheets, Plates & Coils :

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Incoloy 800	7.94 g/cm3	1350-1400 °C	Psi – 75,000 , MPa -520	Psi – 30,000 , MPa – 205	30 – 35 %
Incoloy 800H	7.94 g/cm3	1350-1400 °C	Psi – 75,000 , MPa -520	Psi – 30,000 , MPa – 205	30 – 35 %
Incoloy 800HT	7.94 g/cm3	1350-1400 °C	Psi – 75,000 , MPa -520	Psi – 30,000 , MPa – 205	30 – 35 %
Incoloy 825	8.4 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa -930	Psi – 75,000 , MPa – 517	42.5 %
Hastelloy C276	8.89 g/cm3	1370 °C (2500 °F)	Psi – 1,15,000 , MPa – 790	Psi – 52,000 , MPa – 355	40 %
Alloy 20	8.1 g/cm3	1443 °C (2430 °F)	Psi -80,000, MPa -551	Psi – 35,000, MPa – 241	30 %

Specification of Cupro Nickel Sheets / Plates / Coils

Standard	ASTM / ASME SB122
Grade	90/10 -CuNi UNS C70600, 70/30 -CuNi UNS C715000, ETC.
Size	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 12 mm Thk
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Equivalent Grades for Sheets, Plates & Coils :

STANDARD	WERKSTOFF NR.	UNS
Cupro Nickel 90 / 10	2.0872	C70600
Cupro Nickel 70 / 30	2.0882	C71500

Sheets, Plates & Coils Chemical Composition :

Grade	Cu	Mn	Pb	Ni	Fe	Zn
Cupro Nickel 90 / 10	88.6 min	1.0 max	0.05 max	9 – 11 max	1.8 max	1 max
Cupro Nickel 70 / 30	65.0 min	1 max	0.05 max	29 – 33	0.4 – 1.0	1 max

Mechanical Properties of Sheets, Plates & Coils :

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Cu-Ni 90 / 10	0.323 lb/in3 at 68 F	2260 °F	Psi – 50000	Psi – 20000	30 %
Cu-Ni 70 / 30	0.323 lb/in3 at 68 F	2260 °F	Psi – 50000	Psi – 20000	30 %

Specification of EN Series Sheets / Plates / Coils

Item	EN series
Grade	EN – 8, 9, 19, 24
Thickness	from 3mm up to as thick as 150mm
Length	3000mm-18000mm
Impact tested	-52° C
Technique	Hot-Rolled (HR)

Equivalent Grades for Sheets, Plates & Coils :

Grade	BS970: 1955	BS970/PD970: 1970 onwards	European	Werkstoff No.	US SAE (AISI)
EN – 8	EN8	080M40	C40, C45, Ck40,Ck45, Cm40, Cm45	1.0511, 1.1186, 1.1189	1039, 1040, 1042, 1043, 1045
Grade	BS 970 1991	BS 970 1955 EN	AISI/SAE	Werkstoff	–
EN – 9	070M55	EN9	1055	1.0535	–
EN – 19	708M40	EN19	4140	1.7225	–
EN – 24	817M40	EN24	4340	1.6582	–

Sheets, Plates & Coils Chemical Composition :

Grade	C	Si	Mn	P	S	–	–	–
EN – 8	0.35 – 0.45	0.05 – 0.30	0.60 – 1.00	0.06 max	0.06 max	–	–	–
Grade	C	Si	Mn	P	S	Cr	Ni	Mo
EN – 9	0.50 – 0.60	0.05 – 0.35	0.50 – 0.80	0.040 max	0.040 max	–	–	–
EN – 19	0.35 – 0.45	0.10 – 0.35	0.50 – 0.80	0.04	0.04	0.90 – 1.40	–	0.20 – 0.40
EN – 24	0.35 – 0.45	0.10 – 0.35	0.45 – 0.70	0.04	0.04	0.90 – 1.40	1.30 – 1.80	0.20 – 0.40

Mechanical Properties of Sheets, Plates & Coils :

Grade	Heat Treatment						Corresponding Specification
	Hardening Temperature	Quenching Medium		Tempering Temperature	Brinell Rockwell hardness		JAPAN JIS		AISI	Poldi Thread
EN – 8	750-900	Oil		150-200	–		–		–	–
Grade	Heat Treatment	Condition Tons/SQ.inch		Tensile Stress RE MPA	RP0.2 MPA		A min on 5.65so		Hardness HB	Limited Ruling Section mm
EN – 9	Normalise	45		700	–		12		201-255	63
		39		600	–		13		170/223	250
	R	45/55		700/850	385		14		201/277	100
	S	50/60		775/925	450		14		223/277	63
	T	55/65		850/1000	555		12		248/302	19
Grade	Max Stress	Impact KCV		Hardness	Yield Stress		0.2% Proof Stress		Elongation	–
EN – 19	850 – 1000 n/mm2	55 Joules Min		248-302 HB	700 N/mm2 Min		680 N/mm2 Min		9% Min	–
Grade	Max Stress	Impact KCV		Hardness	Yield Stress		0.2% Proof Stress		Elongation	–
EN – 24	850 – 1000 n/mm2	50 Joules Min	35 Joules Min	248-302 HB	680 n/mm2 Min	654 n/mm2 Min	665 n/mm2 Min	635 n/mm2 Min	13% Min	–
		Up to 150 mm LRS	150 to 250 mm LRS		Up to 150 mm LRS	150 to 250 mm LRS	Up to 150 mm LRS	150 to 250 mm LRS